â 20 Minutes Simply Assembly: to save your valuable time, some components have been preassembled, eliminating mounting issues with great accuracy. Working area: 300x180x45mm; Software: GRBL Control; Spindle: 775 spindle motor (12-36V) 24V:10000r / min; Support System: Windows XP / Win 7 / Win 8 / Win 10.
â Come with 3 W 3000m W module: can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, acrylic, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.
â Support Offline Controller: 1. No need to connect the computer. 2. 1GB large capacity, included SD card reader to write into the root directory G-code files or NC file. 3. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan. 4. Auto identify whether control by the computer. Note: Please don't use the computer and the Offline Controller at the same time, otherwise it will block the communication.
â Upgrade Control Board: The New Control Board was upgraded to extend the lifespan effectively! Protective Case + Integrated Driver Chip + Fixed Heat Sink + External Fan + Power Button. With short circuit protection system, more safe. Because we value your safety a lot:)
â Professional Aftersales Service: we are team specialize in CNC machine and value your shopping experience a lot, pls contact us if you have any question, we will resolve your concern .
Please Let Us Know Firstly If There is Anything Wrong or Missing with Your Package, We will Provide Satisfactory Solution!
DIY CNC Machine-Easy to Design the Image You Want !
For G-code design software- [ Support File Format: JPG, Dxf, G-Code ( *.nc *.ncc *.ngc *.tap *.cnc) ]
You could download EZ Paint, you can import pictures or clip art into the EZ Paint software, there you can add text, or make any changes to the design or clip art that you want.
Then save and send the design to the GRBL software, there you can adjust the size, settings and quality of the design to engrave.
After making the best adjustments in GRBL you can run job.
Widely Used- Comes complete with the kit, just need to swap out the spindle for 3 w power module and change cables
This engraving machine could be used in 2 different ways - 775 spindle motor amp; 3 w power module
With 775 spindle motor- It can be engraved plastic, wood, acrylic, pvc, pcb or the like material. Drill bit can not engrave hard metal, jade or other hard materials.
With 3 w power module-
Materials can be engraved and cut: 3 w power module can engrave and cut cork wood(â¤3mm thick), 250g cardboard, non-woven fabrics, cotton fabric, canvas.
Materials can be engraved BUT cannot be cut: 3 w power module CAN engrave BUT cannot cut 5mm thick cork wood, plastic, solid wood, bamboo, acrylic, jade, ceramics, stone, metal with paint coating, soft metal (Cu, Al).
Materials CANNOT be engraved or cut: 3 w power module CANNOT engrave or cut plywood, and any metal material.
CNC Machine Package
We Pay Attention to Each Package
Come with Goggles
Do not dazzle your eyes when engraving, you can observe the engraving progress as you like
Drill bits: Tip 0.1mm, 20 degree, diameter 3.175mm
Clamps: 4pcs, Hold the thickness of 0-30mm
Note: When the engraving machine is connected to the computer, please don't connect an external control module, otherwise it will block the communication.
"li"Storage File: After the offline board is connected to the computer, it is recognized as a USB mass storage device, and the engraving file can be directly accessed.
Note: The manual, software and assembly video are stored in the USB. More details, please refer to the USB or let us know firstly!
"li"This machine could also work with Easel, UGS, Lightburn and other software.
"li"The offline board can be linked to the GRBL control board for carving without connecting a computer.
"li"The USB socket on board showing [Reader] can be connected to computer with the Android data cable.